XQL-160 Type Hydraulic Rubber Cutter/Rubber Cutting Machinery
|Motor power (kw)||5.5||5.5|
|Fixed cut-off strength||80 KN||160 KN|
|Work flowing tubing head pressure (Mpa)||8||12|
|Bale splitter width(mm)||660||1000|
|Bale splitter starveling schedule (mm)||680||680|
|Overall dimension (mm)||2000*1000*2500||2000*1200*2500|
We also can according to customers' requirement, and design the non-standard model of hydraulic rubber cutter.
This bale cutter is mainly used to cut the natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small piece of rubber.
This bale cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The lead is casted on the base under the rubber knife for protecting the edge of the rubber knife. When cuttingthe raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber. Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.